Open, Check, and Close a Residential Battery Crate

Key Takeaway
A residential battery crate with aluminum edge strips has one job in transit and a second job on arrival. The plywood box and the metal edges keep the cabinet from being crushed on the way. The latches let you open the box, check the unit, and close it again without destroying the package.
Why the Package Is Part of Battery Safety
This shipment is a Weltrus residential stack: a battery cabinet on casters, with the inverter head on top. It leaves the factory as a lithium ion battery. The crate face is marked UN3480, Lithium Ion Batteries, a class 9 diamond, and the plywood-box code 4D/Y60/S/26, with CN/C291302 and PI:097 beside it. Those marks tell the carrier what is inside. They do not, by themselves, stop a forklift, a stack, or a rough road from damaging the cabinet.
That is why the package matters. A crushed corner, a split plywood face, or a lid that had to be pried off is a damage note, not a cosmetic one. The cabinet may have taken the same hit. Safe packaging is the difference between a unit you can inspect and install, and a unit whose case, cells, or marks no longer match the file. Y60 on the code is the tested gross-mass class of the box approval. It is not the weighed mass of this cabinet. Use the packing list for the mass.
What the Aluminum Edge Lets You Do
The aluminum strip runs the plywood corner and is fixed with rivets. It takes the knock from a pallet jack, from the crate beside it, and from the crate above it. In this shipment two closed crates sit one on the other. The edges are what keep that stack from splitting the wood. The same strips keep the lid square, so the latches still meet after the trip.
On arrival, open the latches. Check that the edges are still continuous, the rivets are in place, and the marks are still readable. Look at the cabinet for a crush or a crack that lines up with a broken corner of the crate. Then close the latches. The box should shut the way it shipped. Do not cut the aluminum strip off to save a minute. A cut crate cannot be reset, and it is no longer the package that was supposed to protect a lithium battery for the rest of the journey, or for storage until installation day.
If the cabinet is coming out for installation, the package has finished its job only after that check. The cabinet is heavy. Two people lift it, or a lifting aid rated above the packing-list mass. Casters roll on a level floor after the cabinet is upright. They are not a reason to skip the second person, and they are not a reason to skip the crate check.
| Check | What good looks like | Do not do this |
|---|---|---|
| Aluminum edges | Continuous strips, rivets in place, corners not split | Cut the strips off to open the box |
| Latches | Open for the inspection, then close square | Pry the lid and leave a crate that will not shut |
| Marks | UN3480 and the 4D code still readable | Treat Y60 as the scale weight of the cabinet |
| Cabinet | No damage that lines up with a broken crate corner | Install a unit from a crushed box with no damage note |

What This Note Does Not Decide
- It does not replace the lithium file. UN3480 on the crate is what you photograph. The test summary, the state of charge, and the carrier acceptance stay in the shipping documents.
- It does not publish a model code, a kilowatt rating, or a kilogram. Those lines are on the datasheet and the packing list for the serial you received.
- It does not set how high to stack in a container. Two crates on a level floor show that this box can sit one on another. The loading plan sets the rest.
Send a Photo of the Crate Face
If an edge is split or a latch will not close, send the crate face and the packing-list mass before anyone installs the cabinet. Weltrus will help you decide whether the unit is still the one that shipped.
Frequently Asked Questions
Can this battery crate be opened and closed again?
Yes. The aluminum edge strips keep the plywood square, and the latches open for an inspection and shut again. Do not cut the strips off. A cut crate cannot be reset, and it is no longer the package that protected the cabinet in transit.
Why does lithium battery shipping need a crate like this?
A residential battery cabinet is a lithium ion shipment, marked UN3480 on this box. A crushed corner or a split face can mean the cabinet took the same hit. The plywood box and the aluminum edges are there so the cabinet, the case, and the marks arrive together.
Is the Y60 mark the weight of the cabinet?
No. 4D/Y60/S/26 is the plywood-box approval printed on the crate, including a tested gross-mass class. The mass for the lift and the paperwork is the figure on the packing list.




